AC contractor near me: homeowners comparing two printed AC estimates at a kitchen table
|

AC Contractor Near Me: How to Check a Florida License and Compare Estimates

When you search for an AC contractor near you, the most useful thing you can do takes about a minute: check the license. In Florida, installing or replacing central air conditioning requires a state air-conditioning or mechanical contractor license, and you can look it up for free. This guide explains what the licenses mean and how to compare estimates.

For a broader checklist on choosing a company, see our guide to choosing an HVAC company near you. This article focuses on licenses and estimates.

Florida AC contractor licenses, explained

Florida’s Construction Industry Licensing Board licenses AC contractors under Chapter 489 of the Florida Statutes. These are the main classes you will see on the Florida DBPR license lookup:

License What it allows
Class A air-conditioning contractor Central AC, heating, refrigeration and ventilation systems of any size, including ductwork
Class B air-conditioning contractor The same work, limited to 25 tons of cooling and 500,000 Btu of heating per system
Class C air-conditioning contractor Servicing only. No new Class C licenses have been issued since 1988, and the class does not cover installing new systems
Mechanical contractor Everything a Class A can do, plus a wider range of piping

A home system is far below 25 tons, so a Class A, Class B or mechanical license all cover a residential installation.

Certified or registered?

A certified contractor holds a state license and can work anywhere in Florida. A registered contractor holds a local certificate of competency and can only work in the areas where it is registered. Both are legitimate, but a registered license must cover the city or county where you live.

How to look up an AC contractor’s license in one minute

  1. Ask the company for its license number. A legitimate contractor shares it without hesitation.
  2. Open the Florida DBPR license lookup and search by license number or business name.
  3. Check that the status is Current, Active and that the name matches the company on your quote.
  4. Look at the license type (Class A, Class B or mechanical) and the expiration date.

Technician vs. contractor

A technician who works for a licensed company does not need his own contractor license. The company does. What matters is that the business named on your contract holds an active license, carries insurance and pulls the permit.

How to compare AC estimates line by line

Two quotes for “a new 3-ton AC” can describe very different jobs. Before you compare prices, make sure each estimate lists the same things:

Line item What to check
Equipment Brand, model numbers for both the indoor and outdoor units, tonnage
Efficiency SEER2 rating, and a matched system listed in the AHRI equipment directory
Sizing A load calculation, not just “same size as the old one”
Refrigerant Which refrigerant the new system uses
Permit Permit and inspection included, plus hurricane tie-downs in Miami-Dade and Broward
Extra work Ductwork, electrical disconnect, drain line, thermostat
Removal Removal and legal disposal of the old unit and refrigerant
Warranty Parts and labor warranty, in writing, with how long each lasts

Once every estimate covers the same scope, the price comparison is fair. A quote that is far below the others often leaves out the permit, the tie-downs or the duct work.

Red flags when you search for an AC contractor near me

  • No license number, or a license in a different name than the company.
  • An offer to skip the permit to save money.
  • A full replacement price given over the phone without a visit.
  • Pressure to sign the same day, or a large cash deposit up front.
  • Only a verbal warranty.

Free estimates vs. diagnostic visits

At HVAC Loyalty, quotes for new systems are free and in writing. For repairs, a technician first has to find the problem, so there is a diagnostic visit of $89 to $189, usually waived if you approve the repair. Either way, you see the price before any work starts. See typical prices in our AC repair cost guide.

Where HVAC Loyalty works

We serve 52 cities in 7 counties: Miami-Dade, Broward and Palm Beach in South Florida, and Orange, Seminole, Osceola and Polk in Central Florida. See the full list on our service areas page, or call (305) 333-8272.

Want an AC estimate you can compare?

Get an itemized written quote with the permit included. A real dispatcher answers 24/7.

Call (305) 333-8272Request service online

AC contractor near me: frequently asked questions

What license does an AC contractor need in Florida?

To install or replace central air conditioning, a contractor needs a Class A or Class B air-conditioning license or a mechanical contractor license. You can verify any license on the Florida DBPR license lookup.

Can a Class C contractor install a new AC?

No. The Class C classification covers servicing only, and no new Class C licenses have been issued since 1988.

What is the difference between certified and registered contractors?

A certified contractor can work anywhere in Florida. A registered contractor can only work in the local areas where it holds a certificate of competency.

What should an AC estimate include?

Equipment model numbers, tonnage, SEER2 rating, a load calculation, the permit, hurricane tie-downs where required, any duct or electrical work, removal of the old unit and written warranty terms.

Do you give free AC estimates?

Yes, for new systems. Repairs start with a diagnostic visit of $89 to $189, which is usually waived if you approve the repair.

Related services and guides

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *